Form Factor
|
Mini-ITX form factor at 170 x 170 mm
|
CPU
|
Onboard Intel® ULV Celeron M 600Mhz
@ 400 MHz FSB uFCBGA CPU
|
Memory
|
One 184-pin DIMM socket
Support up to 1 GBytes DDR 266 SDRAM
|
Chipset
|
Intel® 82852GM GMCH and 82801DB ICH4
|
Watchdog Timer
|
Programmable generates NMI or system reset watchdog timer
with 1 to 255 sec. / min. of time out value
|
Power Management
|
ACPI 1.0 compliant, supports power saving mode with ATX PSU
|
Real Time Clock
|
Intel® ICH4 built-in RTC with onboard lithium battery
|
PCI Enhanced IDE
|
Dual UltraATA/100 bus master IDE channels
Support up to 4 ATAPI devices on 40-/44-pin IDE ports
Jumper selectable Vcc power output on 40-pin IDE1
for power cable free DiskOnModule flash disk
|
VGA Interface
|
Intel® 852GM GMCH built-in Intel Extreme Graphics 2
with 266 MHz VGA core and 256-bit 3D engine
Intel® Dynamic Video Memory up to 64 MB shared with system
External DB15 female connector on rear I/O panel
|
LVDS Interface
|
Intel® 852GM GMCH built-in Intel® Extreme Graphics 2
with onboard Chrontel CH7017A built-in LVDS transmitter
Resolution up to 1400 x 1050 SXGA+
Support 24-bit Dual channel LVDS TFT LCD
Onboard 20-pin Hirose DF13-20DP-1.25V connector
|
TV-out Interface
(Optional)
|
Intel® 852GM GMCH built-in Intel® Extreme Graphics 2
with MA-SDTV Mini-AGP add on card
|
LAN Interface
|
Intel® 82541PI Gigabit Mbps Ethernet interface
|
Audio Interface
|
Intel® ICH4 with onboard ACL650 AC97 3D audio codec
5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
|
PCMCIA Interface
|
PCI RICOH R5C475II PCMCIA PC card / CardBus controller
Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification
16-/32-bit data bus, support hot swap function
Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card
One PCMCIA type-I/II slot
|
Hi-Speed USB 2.0
|
Intel® ICH4 chipset built-in Hi-Speed USB 2.0 interface
with 480 Mbps of data transfer rate and bootable setting in BIOS
|
Multi-I/O Port
|
2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD,
1 x PS/2 keyboard and mouse port.
|
External I/O Port
|
Back panel : PS/2 keyboard and mouse port, VGA, parallel port,
Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0,
DC power input.
Front panel : MIC, Line in & earphone or Central/Base,
Rear & Front audio outputs and 2 x Dual USB port
|
Solid State Disk
|
CompactFlash Card
CompactFlash socket supports CompactFlash Card (CFC)
Support PIO mode 4 up to 16.6 MBytes of data transfer rate
Default setting as secondary IDE port at master mode
Bootable, driver free IDE-based flash disk
Flash memory capacity up to 1 G Bytes (and beyond)
DiskOnModule Flash Disk
IDE-based, bootable, driver free DiskOnModule flash disk
PIO mode 4 with 16.6 Mbps of data transfer rate
Flash memory capacity up to 1 GB ytes (and beyond)
|
Expansive Slot
|
One 32-bit PCI slot supports 2 bus master PCI via riser card,
and Mini-PCI or Mini-AGP port can be used optionally.
|
Environment
|
Power Requirement: Single 19V 6A DC input or 12V 10A DC input Board
Dimension (W x L): 170mm x 170mm with standard Mini-ITX form factor
Operation Temperature: 0 ~ 60oC (32 ~ 140oF)
|
